Basic guide to setting up a disaster recovery site

rackalley1Written by Rack Alley

This a basic step by step guide to setting up a cold site at a la data center for a small to medium sized company that has its own application servers in house.

Virtualize

The first step to making a relatively quick (read: hours to days) transition from your office to a cold site with server hosting Los Angeles during a disaster is to virtualize all critical servers in the organization. Ideally, an in-house cluster is the best way to maintain redundancy at the main site.

Backup

Daily backups of critical data and weekly backups of all other data is the next step to put in place. This data can then be restored at the cold site in the event of a disaster. These backups can be taken on tape or disk but need to be stored at an offsite location. Ideally, this would be away from the office.

Replicate

Any critical systems where any data loss cannot be tolerated should be replicated in real time to the cold site. Since the workloads would have been virtualized systems like Hyper-v can replicate to another over the internet every few minutes.

You now have a system where in the event of a disaster, the critical system can be failed over, at which point the restore process from backups can begin. After some DNS and other changes, the cold site is brought up until the main site can be restored.

______________________________________________

Rack Alley provides premium LA colocation services perfect for small and enterprise customers at their Los Angeles data center

The advantages of shared web hosting

3Written by Rack Alley

One of the many choices when it comes to hosting your own website is shared web hosting. Basically, shared web hosting is one server shared amongst hundreds or even thousands of accounts. Each of these accounts can have many sites/domains run by them. While this does sound problematic, and does have its share of issues, it also comes with some benefits:

Cost

Shared web hosting is cheap. You will most likely be paying less than ten dollars a month for an account that lets you host a few domains, websites etc along with some email accounts. For a site starting out it means not having to shell out hundreds of dollars for capacity that will not be used.

Growth

These shared hosting services are limited by the amount of resources you can use. Although they do state that most are unlimited, it is not so and you will eventually have to upgrade when the site grows. But this is not a bad thing. As your site gets bigger, you have the option of upgrading the package in place. You can go to a higher shared package or even go to dedicated or virtual hosting or colocation at an la data center.

Support

Services like la colocation have a lot of flexibility but it also means a lot of more work. You will almost certainly have to do everything on the server yourself. Shared hosting comes with support where a lot of the leg work can be done for you. Certain levels of support are provided and anything additional can be paid for.

___________________________________________________

Rack Alley is a provider of colocation services, including server hosting los angeles.

A primer of shared hosting packages

Written by Rack Alley

Choosing a web hosting package for the first time user can be a difficult prospect. There are so many different packages to choose from. The differences between them might not be so obvious. The most popular package you will find on almost any web host is the shared hosting package. They come in many names but are usually the cheapest or one step up from the cheapest. Here is a primer on what to expect from a shared hosting package:

Shared

This reason that these packages are so cheap is because they share a single web server across multiple accounts. In some cases this could mean that a shared account could have thousands of other users on the same server. There are few problems that can stem from that. Firstly, anything that another webmaster on the same la web hosting does can affect your uptime. If a site is suddenly hit with a spike of traffic, it can slow all the other sites on the same server. The same goes for punishments.

Unlimited

These packages also trumpet how they allow unlimited amounts of everything. Unlimited bandwidth, disk space etc. None of this is true. For most customers there are enough resources provided that they would never notice. However, were your site to suddenly become a breakout hit or get a massive amount of traffic, you are likely to be shut down citing some condition. They will then recommend a dedicated server.

Other limitations

There are also some other limitations. The easiest example is security. Now that Google gives additional ranking boosts to sites that use SSL, every site is now looking to get SSL setup. Unfortunately most shared hosts will not be able to give you a dedicated IP that SSL requires. You will need to get proper server hosting los angeles in order to get that dedicated IP.

____________________________________________________________

Rack Alley provides premium colocation services perfect for small and enterprise customers at their los angeles data center.

The Harsh Reality of Radioactive Labeling

Once commonly used, the hazards have now outweighed the benefits.

Oligonucleotides have been a major contributor in biological and forensic research for years now. Certain applications such as taking on the role of a sequence binding agent to reveal the present of a DNA sequence have provided researchers new information to work off of. In these applications, oligos are labeled for identification purposes. Some of these labels come from radioactive nuclei such as RNA triphosphates. When applied to the oligos, they can be directly added into nucleic acid probes via enzymatic methods like nick translations.

The Hazards of Radiolabeling

However, radioactive labeling does have its caveats. There are a variety of known hazards when handling any forms of radiation. In addition to this, radiolabelling requires there to be careful handling and disposing, which scientists need to closely be wary about. Although this method of labeling does have its advantages in that it provides high sensitivity for the oligo, or the modified oligo, but the expense of working with it makes it difficult to consistently utilize. Therefore, other labeling methods such as fluorescent labeling, colorimetric, and chemiluminescent have been becoming increasingly popular. In most application, radiolabelling isn’t even used anymore. But, every now and then, you’ll find that certain applications require the use of radioactive methods to achieve a breakthrough.

Labeling Requirements

In order for an oligo to be labeled, it must possess certain properties that scientists deem feasible. One of the most common ones would be that the label should be able to attach easily under mild conditions using any type of protocol – regardless of how simple or cheap it is. Another requirement is that the label can be detected at the lowest concentration, otherwise the findings would be inconclusive.


 

The Midland Certified Reagent Company carries all the supplies that you need to maintain the perfect oligo synthesis process. For more information, visit them online.

How to conduct a free online check?

2

 

Many people conduct background criminal checks on individuals to protect themselves as well as their loved ones. It is also a good idea to conduct a background criminal check on yourself. This can help you gather sensitive information that can be used by a potential employer, stalker or exes. Instant criminal background check online can be expensive and require a lot of information that you may not have. Here are a few tips on how to conduct a free background check online.

Target’s name – Use search engines and social networks such as Google, Facebook, LinkedIn, and Twitter. To narrow your search, try entering any other information you know about your target, for example if your target’s name is Jane Doe and she works at Mcdonalds, include Jane Doe; Mcdonalds in your search.

Searching Your Social Networks – Facebook is the best tool to provide information on your target. Since the information provided is self voluntary, it is a much used tool by many employers. If entering your target’s name and email address does not provide you with any results, this maybe because they have placed their profile on private and unsearchable. In this instance, you can do a site specific google search. This will bring up any public pages or groups they have commented on.

Finding your target’s phone number and address – To find your target’s phone number, you can use ZabaSearch. For mobile phone numbers a good web site is WhitePages.com. If you’re successful and locate a mobile number, it will also include an address for your target.

Why PVD is Dominating the Coating Industry

PVD is commonly used in a variety of today’s industries.

With the numerous amounts of PVD coating equipment available on the market, it’s safe to say that physical vapor deposition is the way to go in terms of coating methods.

PVD is a More Stable Option

One of the more household uses of PVD has to do with the timepiece that you have on your wrist right now. The reason why physical vapor deposition is the preferred method is because of its solid hold on the metal compound. Old techniques, like powder coating proved to only be a temporary solution as continuous contact with it will result in it rubbing off.

Additionally, the deposition process is extremely flexible, which is one of the main reasons why so many industries are taking advantage of this technology presently. Another example that you might not be aware of are the transmission gears and engine parts in racing cars. Because of the reduced friction wear, PVD is has been known to increase the reliability of engines – think about it, over 10,000 RPM’s would require a drastic reduction in friction. This resilience is coveted by high-powered car manufacturers.

The Application of PVD

The application of PVD works in a similar fashion as electroplating would. If you aren’t familiar with electroplating, it essentially involves an electric current as the primary deposition factor. There are plenty of methods for PVD, it honestly depends on the industry. Vacuum coating systems, for example, are used more commonly for watches due to its air tight environment and application necessitates.


 

Denton Vacuum, LLC offers the highest quality sputter coater that you can find on the market today. For more information, speak with one of their representatives today.

Radio: An Influential Marketing Tool for Advertisers

Radio advertisements tend to be repetitious and sometimes over-the-top. However, the fact that you can relate to these ads means that they’re doing something right.

By identifying and understanding who’s listening to your radio advertisements, you’ll be able to implement additional strategies to your marketing plan to increase the likelihood of gaining additional customers.

A Solid Return

Advertising through the radio has been a long-successful marketing tool used by major corporations all the way down to brick-and-mortar stores. It’s without a doubt less expensive than television advertisements and still manages to stand toe-to-toe in regards to investment return. Steve Doctrow, from Rogers & Cowan, explains that radio is a premiere place for brands to drive market shares.

The Reaches of Radio

If you’re wondering how radio advertisements reach the masses, consider your typical drive to work. If you’re not pumping songs through a music player or a compact disc, then you’re probably listening to the radio. Whether it’s your favorite DJ in the morning or that personable talk show host, there are mandatory breaks in between broadcasts. Anywhere from 5 to 10 advertisements will litter your radio, with some even driving you crazy because of the repetition.

Now, picture this. On your morning commute, how many advertisements can you actually remember? While there aren’t too many that will come to mind, you might think of that one jingle at the end of that car commercial, or that dramatic advertisement that’s prompting you to seek a lawyer for an accident. That subtle lasting impression could be your advertisement at work. On average, it takes an advertisement to play itself more than 3 times for the average person to actually start taking the details in. So, if you remember a specific advertisement, then they’re doing exactly what they set out to do.

The Most Important Thing to Look for in a Tenant

If you own an apartment complex or some other type of rental property, it goes without saying that your success will depend in large part on the people you get to live there. You need to be very careful about the kinds of people you let into your building, as they will make or break your entire business.

instantbackgroundchecks3There are a number of ways you can regulate who gets to live in your building without breaking any laws. Obviously, where your building is located will have a big effect on this, as will the amount you charge.

However, the most important step you absolutely must take is conducting the background criminal check. This is to ensure you’re not letting any violent criminals onto your grounds where they could put your entire business in danger.

Obviously, you don’t want someone breaking things, including the rules. Getting rid of tenants, even when they’ve signed a contract, can be a huge headache that actually ends up costing a lot of money.

The worst case scenario would be a tenant who turns out to be violent toward your employees or other tenants.

Fortunately, with background checks online these days, you can get one done in a matter of days (usually). So there’s absolutely no reason to put one off.

The Application and Advantages of Ion Beam Sputter Deposition

Written by: Denton Vacuum, LLC

Summary: Learn why ion beams are favorable for certain applications.

Ion beam technology has been around for a long time. There are numerous advantages of utilizing ion beam sputter deposition techniques over physical or chemical deposition. Here is a breakdown of the advantages and practical uses that are still applied today.

Ion beams have the capability to coat applications with a wide range of specifications that surpass those of physical or chemical deposition. Their platforms showcase their interchangeability and flexibility by providing the user with either a simple rotation or multi-faceted flip fixture.

What is Ion Beam Sputtering?

Essentially, an ion source is generated to create a beam that targets an object. What the ion beam is consisted of is an anode and a cathode. With the application of a high amount of voltage, an electrostatic field is then created within the ion’s source pushing the ions towards the center. After a gas is injected – which is a crucial step in the process – the gas begins to ionize and the source creates plasma within. After, this process then shoots an ion in a form of beam directly at the target and sputters the material onto the sample. This process follows a similar pattern to e-beam evaporation but involves plasma instead of electrons.

Certain applications, such as biological applications, favor ion beam sputtering due to certain factors such as heat and thermal sensitivity. Excellent sources of coating can be still produced on heat sensitive samples due to the sputtering process’s enhanced capabilities. For example, a slice of cheese can be coated using an ion beam without any complications from the deposition process. An ebeam ray wouldn’t be able to match this type of quality produced.

Why You Should Take Your Time Picking Out an Online Shopping Cart

By Secure Net Shop

Do you have an ecommerce website? Are you thinking of starting one? In either case, you probably already know that there are certain ingredients you’re going to need if you hope to succeed in bringing in an impressive amount of revenue every month.

SecureNetShop3What you can’t afford to do is underestimate the importance of any of these essential elements. For example, a lot of people fail to appreciate that they absolutely need an online shopping cart for their website. As a result, their profits suffer. Worse still, they may fail to make the connection so they never rehabilitate their revenue stream.

The right internet shopping cart is about more than just giving your customers a virtual repository for the items they want to purchase. That would be like saying a traditional business hires employees just to walk around the store. In reality, the difference between good employees and lackluster ones will make the difference between an ecommerce site that works and one that falls on its face.

Not only does your site need to be easy to use, it must also have an easy time getting your customers to purchase greater amounts of product. So be careful in making your decision and implementing it ASAP.

 _________________________________________________

If you’re in the market for shopping cart ecommerce software, you won’t do better than the options at Secure Net Shop. Not only do the people behind this business clearly know their stuff, but their prices are extremely reasonable too.